1.編輯網卡信息
[root@linux~]# cd /etc/sysconfig/network-scripts/ #進入網卡目錄
[root@linux~network-scripts]# mv ifcfg-eno16777728 ifcfg-eth0 #重命名網卡名稱
[root@linux network-scripts]# cat ifcfg-eth0 #編輯網卡信息
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
NAME=eth0 #name修改為eth0
ONBOOT=yes
IPADDR=10.70.18.21 #定義ip地址
NETMASK=255.255.255.0 #定義子網掩碼
GATEWAY=10.70.18.1 #網關定義
DNS1=114.114.114.114 #DNS定義
2.修改grub
[root@linux-node2 ~]# cat /etc/sysconfig/grub #編輯內核信息,添加紅色字段的
GRUB_TIMEOUT=5
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="crashkernel=auto rhgb net.ifnames=0 biosdevname=0 quiet"
GRUB_DISABLE_RECOVERY="true"
[root@linux-node2 ~]# grub2-mkconfig -o /boot/grub2/grub.cfg #生成啟動菜單
Generating
grub configuration file …
Found
linux image: /boot/vmlinuz-3.10.0-229.el7.x86_64
Found
initrd image: /boot/initramfs-3.10.0-229.el7.x86_64.img
Found
linux image: /boot/vmlinuz-0-rescue-1100f7e6c97d4afaad2e396403ba7f61
Found
initrd image: /boot/initramfs-0-rescue-1100f7e6c97d4afaad2e396403ba7f61.img
Done
3.驗證是否修改成功
[root@linux-node2 ~]# reboot #必須重啟系統生效
[root@linux-node2 ~]# yum install net-tools #默認centos7不支持ifconfig 需要看裝net-tools包
[root@linux-node2 ~]# ifconfig eth0 #在次查看網卡信息
eth0:
flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.56.12 netmask 255.255.255.0 broadcast 192.168.56.255
inet6 fe80::20c:29ff:fe5c:7bb1 prefixlen 64
scopeid 0x20<link>
ether 00:0c:29:5c:7b:b1 txqueuelen 1000 (Ethernet)
RX packets 152 bytes 14503 (14.1 KiB)
RX errors 0 dropped 0
overruns 0 frame 0
TX packets 98 bytes 14402 (14.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0
collisions 0
原創文章，作者：wanghui，如若轉載，請注明出處：http://www.www58058.com/54231
